1999 Volvo Penta "WT" Models Workshop Manual, Page 363Get this manual

1999 Volvo Penta "WT" Models Workshop Manual, Page 363

Exhaust Pipe Replacement Removal
1Remove engine following previous procedure

2Remove and retain four exhaust pipe screwsRemove exhaust pipe and discard seal Clean all material from transom bracket and exhaust pipe seal surfaces

Exhaust pipe mounting holes have locking Heli-Coif'B) insertsDo not clean screw holes with thread tapping tool, otherwise locking feature will be destroyed and Hefi-Coil will have to be replaced
Installation

rn 1300 m

Back to 1999 Volvo Penta "WT" Models Workshop Manual