1999 Volvo Penta "WT" Models Workshop Manual, Page 330Get this manual
V6 and Small Block VB Models Only: The engine throttle cable anchor block bracket has several sets of anchor block holesThe sets of holes marked with "V" Q) are used for Volvo Penta enginesThe set of holes marked "GSI" are for 5.0 and 5.7 Litre EFI modelsThe set of holes CD marked "43" are for 4.3 Litre 2V (2 barrel) and 4V (4 barrel) carburetor modelsHoles ([0) are for all 5.0 and 5.7 Litre, 2V (2 barrel) and 4V (4 barrel) carburetor modelsThe anchor block will be set at the correct position from the factory for your particular engineEngines using remote controls must have the anchor block moved to hole set that does not have "V" Q)orv1C remote control are pull-to-close controls
3Install open end of trunnion in anchor blockInstall screw in anchor block and position throttle cable assembly in selected set of holesLocknut must be against the anchor bracket, tighten it securely