1999 Volvo Penta "WT" Models Workshop Manual, Page 327Get this manual
Check Remote Control Shift Cable Stroke []] 1Move the remote control handle to the wide-open-throttle
position in the direction needed to retract the shift cablePull out cable core wire to remove end playMark cable core wire at end of casing
2Return remote control shift handle to the neutral detent positionMeasure and record the distance between mark and end of casing3Mark cable core wire at end of casing with control in the neutral detent position
m rn 4Move the remote control handle to the wide-open-throttle
position in the direction needed to extend the shift cablePush in on cable core wire to remove end playMeasure and record the distance between mark and end of casing, The distance between forward and neutral must be no less than in(31,8 mm) and no greater than P8 in(35,0 mm) The distance between neutral and reverse must be no less than in(31,8 mm) and no greater than in(35,0 mm)