1999 Volvo Penta "WT" Models Workshop Manual, Page 313Get this manual
5Connect hoses to cylinderStart each fitting by handTighten pressure fitting to 10-12 ftIbs(14-16 Nm)Tighten return fitting to 15-17 ftIbs(20-23 Nm)
6Pull steering arm CD into hydraulic cylinder clevis Q)Align holes and install large pin from top of armSecure large pin by installing and spreading ends of cotter pin
Cable Installation _
[IQ]1Turn the steering wheel to fully extend the steering cable ram to its maximum extensionLubricate the full length of the steering cable ram with Volvo Penta Grease or a!Jk: Triplegrease2Retract steering cable ram
CD and insert ram through valve