1999 Volvo Penta "WT" Models Workshop Manual, Page 307Get this manual
Pump Removal
1Place an oil drain pan under pumpDisconnect high pressure hose CD and return hose Q) at pumpDo not lose O-ring on pressure hose fittingSecure hose ends in raised position to prevent fluid draining from hosesCap or tape ends of hoses to keep out dirtDrain pump completely before removing2Loosen pump bracket mounting screws and re-
m.drive beltrn move
3.0 GS Models
4.3 GL, GS, G;, 5.0 GL, G;, 5.7 GS and GS; Models]7.4 Gi, GSi and 8.2 GSi Models
3Take out mounting screws and remove pump from engine