1999 Volvo Penta "WT" Models Workshop Manual, Page 239Get this manual

1999 Volvo Penta "WT" Models Workshop Manual, Page 239

2Coolant Temperature sensor to lower intake manifold after applying GM Sealant, PIN 12346004 Tighten:
Sensor to 15 ftIbs(20 Nm)Lubricate the injector O-ring seals with clean engine oil and install on the spray tip end of each injector
Important

[[] 3Fuel rail assembly in the intake manifoldTilt the rail assembly to install the injectors
4Fuel rail attaching bolts and stud

Back to 1999 Volvo Penta "WT" Models Workshop Manual