1999 Volvo Penta "WT" Models Workshop Manual, Page 187Get this manual

1999 Volvo Penta "WT" Models Workshop Manual, Page 187

4Coat threads of cylinder head bolts with GM Sealant, PiN 12346004, or equivalent5Cylinder head bolts Tighten:

1In sequence first pass to 22 ftlb(30 Nm)2In sequence final pass using 36660 or equivalent to: Short bolts(3,4,7,8,11,12,15,16) 55 degreesMedium bolts(14,17) 65 degreesLong bolts(1,2,5,6,9,10,13) 75 degrees
Crankshaft Balancer
Removal
Tool Required: 39046 Crankshaft Balancer Remover

Back to 1999 Volvo Penta "WT" Models Workshop Manual