1999 Volvo Penta "WT" Models Workshop Manual, Page 155Get this manual

1999 Volvo Penta "WT" Models Workshop Manual, Page 155

dIf the gap is found to be less than 0.004 in(0,1016 mm) within 5.984 in(152 mm) at any sealing location and cause for leakage is suspected, then the minor irregularities may be carefully machined from the block Oil pan and intake manifold mounting surfaces for nicksMinor irregularities may be cleaned up with flat file Cylinder Bore Inspect:
Cylinder bores for scoring or other damageRefer to General Engine Mechanical section in this manual
Measure:
Cylinder bore taper and out-af-roundRefer to General Engine Mechanical section in this manual
Cylinder Bore Reconditioning Measure:

Back to 1999 Volvo Penta "WT" Models Workshop Manual