1999 Volvo Penta "WT" Models Workshop Manual, Page 98Get this manual
2Place piece of gauging plastic the full width of the bearing (parallel to the crankshaft) on the journal
INote) Do not rotate the crankshaft while the gauging plastic is between the bearing and journal3Install the bearing cap and evenly tighten the retaining bolts to 55-70 ftIbs175-95 Nm)4Remove bearing capThe flattened gauging plastic will be found adhering to either the bearing or journalOn the edge of gauging plastic packing envelope there is graduated scale measuring in thousandths of an inch