1999 Volvo Penta "WT" Models Workshop Manual, Page 96Get this manual
6If the reading is not over 0.0009 in(0,0229 mm) or not less than 0.0014 in(0,0356 mm) the fit is satisfactoryIf however, the clearances are not within these limits, replace the bearing with the proper undersize bearingINotel The bearings are not adjustable and no attempt should be made to adjust by filing or shimming the bearing capsInstallation New bearing clearance should be 0.0017-0.0027 in(0,043180.06858 mm)1Rotate the crankshaft after bearing adjustment to be sure the bearings are not too tight 2Check connecting rod end clearance between connecting rod cap and side of crankpinSee Engine Specifications for clearance
3Install oil pan with new gaskets and sealsConnect oil drain tubeRefill with engine oil
Crankshaft Bearings