2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 794Get this manual

2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 794

Section 02 ENGINE Subsection 08 (CYLINDER HEAD)
5Cut locking tie retaining the CAPS sensor connector to sensor6Unplug and remove the CAPS sensor from the valve cover
1 Cut rhis Oeriker clamp 2Vent wbe

11Remove screws (8) retain ing valve cover
7Unplug and remove ignitions coils
1Valve cover screws

12 Pull up the cover13Tilt the front of the valve cover toward the exhaust manifold 1Ignition coils