2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 746Get this manual

2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 746

Section 02 ENGINE Subsection 04 (LUBRICATION SYSTEM)
6Remove and clean engine oil strainers

7Engme 011 strainers

2Oil sump cover

Oil Sump Cover Inspection
Clean oil sump cover and engine oil stra iners ith part cleaner, then use an air gun to dry itBlowout the oil orifices and check if they are not clogged
TIGHTENING SEQUENCE

Reinstall oil drain plug using NEW sealing washerInstall engine in vehicleRefer to ENGINE REMOVAL AND INSTALLATION subsection Fill up engine oi and check oil levelRefer to EN GINE OIL REPLACEMENTat the beginn ing of this subsection
OIL SPRAY NOZZLES
The oil spray nozzles are located, between upper and lower half of cylinder block
IBlowout 011 onflces

Check oi su mp cover for cracks or othe damagesCheck oil sump cover for flatness with straight edge Replace oil sump cover if necessaryClean engine oil strainers with part cleaner then use an air gun to dry itCheck engine oil strainers for damage and cha nge if necessary