2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 741Get this manual

2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 741

Section 02 ENGINE Subsection 04 (LUBRICATION SYSTEM)

Oil Pump Gear Installation
For installation, reverse the removal procedurePay attention to the following details 1Ensure not to mix up the oil pump gears, see next illustration 1.1 Install the BROWN oil pump (29 teeth) on oil pressure pumpgear

2Rem ove OIL PUMP GEARS, see procedure in this subsection 3Un screw oi pump cover
1.2 Install the BLACK oil pump gear (28 teeth) on oil suction pump
I fn ?CQ111

1Retaming screws 2Oil pump cover

4Remove the fol lowing parts
mrnr JOO9 '1, ()i'6

1BROWN oil pump gear29 teeth 2BLACK oil pump gear28 teeth

2Apply engine oil on bearing sleeves of intermediate gear during installation 3Install all other removed parts