2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 738Get this manual

2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 738

Section 02 ENGINE Subsection 04 (LUBRICATION SYSTEM)
6Place drain pan underneath oil tank 7Remove oil tank from the engine
Oil Tank Installation
The installation is the reverse of the removal procedure However, pay attention to the following details 1Install NEW oil tank O-ring s
2Coolant hose 3Oil cooler

1Oeiker clamp

4Steering column

6Remove oi cooler retaining screws
m'I IIJtxlH l,'S "

1New -"119S 2Oil tal1k

2Properly fit oil tank to engine, ensure not to damage the O-rings during installation 3Install NEW Oetiker clamp to oil tank vent hose4Wipe off any oil spillage5Install the engine in the vehicle Refer to ENGINE REMOVAL AND INSTALLATION subsection 6Refill oil tank with recommended oil and at the proper levelRefer to ENGINE OIL REPLACEMENTat the beginning of this subsection 1Retaining screw 2Oil cooler