2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 736Get this manual

2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 736

Section 02 ENGINE Subsection 04 (LUBRICATION SYSTEM)
1Apply oil here

4Install the oil filter cover5Tighten oil filter cover screws 4Read result and compare to table RESISTANCE (0)

OIL PRESSURE SWITCH (OPS)
Oil Pressure Switch Activation
The oil pressure switch activates if engine oil pressure falls between 20 kPa and 40 kPa (2 .9 PSI and 5.8 PSI) OPS pin

ENGINE NOT RUNNING Engine ground Close to (normally closed switch)

Oil Pressure Switch Inspection
First, ensure oi pressure is adequate Refer to

If resis tance is out of specificat io n, replace the oil pressure switch If the re sistance is correctgo to step 5
ENGINE OIL PRESSURE