2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 733Get this manual

2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 733

Section 02 ENGINE Subsection 04 (LUBRICATION SYSTEM)
9Install NEW sealing washer and O-ring on oil drain plug
IN,JiM Never use sealing
washer second timeAlways replace with new one
4Completely tighten the ADAPTER HOSE (PIN 529 035652) on the OIL PRESSURE TEST CAP (PIN 529 036 158)
Ivnl( lt )l j

, Sealmg washer 2Ormg 3Oil dram plug

10Install and tighten oil drain plug 11Replace OIL FILTER, see procedure in this subsection 12Refill oil tank at the proper level ith the recommended oilNOTE: Engine oil capacity with filter at oil change is approximately 3.5 (3 .7 qt (U .Sliq.ll 13Reinstall dipstick in oi tank 14Start engine and let it idle for few minutes 15Ensure there are no leaks16Stop engine and check oil levelRefill as necessary17Dispose oil and filter as per your local environmental regulations