2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 732Get this manual

2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 732

Section 02 ENGINE Subsection 04 (LUBRICATION SYSTEM)
6Completely insert dipstick in the filler tube and tighten it by 14 turn
Engine Oil Replacement
Th engin oil can be very hotWait until en 'ne oil is arm
tiU,Jitjj

Engine oil and oil filter must be re-

placed at the same time1Place vehicle on level surface2Remove the LH side panel3Remove he drive be lt guard Refer to DRIVE BELT subsection1 11

4Remove dipstick
Slep 1: Insert dlpSl1ck

Step 2: Turn 14 turn

7Remove dipstick again and check oil levelIt should be near or equa to the upper mark

2;1Dips tick