2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 725Get this manual

2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 725

Section 02 ENGINE Subsection 03 (EXHAUST SYSTEM) , '

2Remove manifold nuts using 10 mm thin wall socket (14 drive) such as the SNAP-ON 10 MM SOCKET (PN ith wobble extension such as the SNAP-ON WOBBLE 8' EXTENS ION

2.1 Firstloosen both lower central nuts

MUFFLER SIDE 1Exhaus pipe 2Exhaust gasket

3Mufflel

1Lower centrailluts

2.2 Loosen the other nuts 2.3 Lift up the front portion of th ex haust man ifold and remove lower nuts 2.4 Rem ove the remaining nuts3Remove the ex haust manifold 4Remove and discard th exhaust manifold gaskett

EXHAUST MANIFOLD SIDE 1Exhaus pipe 2Exhaus gasket Exhaust manifold

Exhaust Pipe Inspection