2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 713Get this manual

2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 713

Section 02 ENGINE Subsection 01 (ENGINE REMOVAL AND INSTALLATION)
PTO Side Rear Engine Support 1Apply LOCTITE 243 (BLUE) (PIN 293 800 060) on threads of engine rubb er mount bolt2Install the engine stopper and bushing
TIGHTENING SEQUENCE

3Install NEW engin rubber mount screwDo not forget the ground cable
1Engine stopper 2Engll1e stopper bushll1g

3Install loosely the engine rubber mount bolt
4 In stall NEW engine support screws 5Tighten fasteners in this order