2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 707Get this manual

2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 707

Section 02 ENGINE Subsection 01

(ENGINE REMOVAL AND INSTALLATION)

1Brea ther 2Remove these screws

1Caliper protector screws

22Remove screw securing the camshaft position sensor (CAPS) then move the sensor aside
25Remove the Banjo fitting then move the brake hose asideDiscard seal ing ashe rs
1Banjo fitring 2Brake hose 1CAPS sensor 2Steenng column