2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 704Get this manual

2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 704

Section 02 ENGINE Subsection 01 (ENGINE REMOVAL AND INSTALLATION)
GENERAL
During assemblyinstallation, use the torque values and service products as in the exploded viewClean threads before applying threadlockerRefer to SELF-LOCKING FASTENERS and LOCTITE APPLICATION at the beginning of this manual for complete procedure
WARNING
2Negative cable
7Battery

Torque wrench ightening specifications must be strictly adhered toLocking devices (e.g locking abs, elastic stop nuts, corter pin, etc must be replaced with new onesHoses, cables or locking ties removed during procedure must be reinstalled as per factory standards
5Remove muffler, exhaust pipe and exhaust manifoldRefer to EXHAUST SYSTEMsubsection
tifluW' Locking ties removed during procedure must be replaced and installed at the same location