2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 683Get this manual

2009-2010 Ski-Doo REV-XP/XR 2 Stroke and REV-XR 1200 4-TEC Service Manual, Page 683

INTRODUCTION
TIGHTENING TORQUE
lighten fasteners to torque mentioned in exploded views or textWhen th ey are not spec ifiedrefer to following tab le
WARNING

Torque wrench tightening specifications must strictly be adhered toLocking devices (e.g locking tabs, elastic stop nuts, self-locking fasteners, cotter pins, etc must be replaced with new onesIn order to avoid poor assembling, ighten screws, bolts or nuts in accordance with the ollowing procedure1Manually screw al screw s, bolts andor nuts 2Apply the half of the recommended torque value
INoitij

Be sure to use proper tightening torque for the proper strength grade
NOTE: When possible, always apply torque on the nut3Torque at the recommended torque value NOTE: Always torque screw s, bolts or nuts in crisscross sequence 4.8
Pro perty lass and head markings 8.8 9.8 10.9 12.9