2006 Ski Doo REV Service Shop Manual, Page 377Get this manual
Section 08 DRIVE SYSTEM Subsection 07 (DRIVE AXLE)
ASSEMBLY
Drive Axle and Sprocket
To assemble press fit sprockets no6 and no7, use press and suitable pipe as illustratedSprockets must be assembled according to the following dimensions measured from drive axle endGSX Limited and Sport, GTX Limited and Sport, MX-Z Adrenaline, Renegade, Renegade and Trail Models
A33D1UA
MEASURE FROM END OF DRIVE SHAFT A48.3 mm (1.902 in) B150.8 mm (5.937 in) C273.8 mm (10.780 in) D376.3 mm (14.815 in)