2006 Ski Doo REV Service Shop Manual, Page 349Get this manual
Section 08 DRIVE SYSTEM Subsection 03 (DRIVEN PULLEY)
REMOVAL
Remove guard and drive belt from vehicleRemove pulley retaining screw no14 and shouldered washer no12 then pull the driven pulley from the countershaftTake care not to lose spacer no2
CLEANING
Large Bushing and Small Bushing
During break-in period (about 10 hours of use), teflon from bushing no8 and no9 moves to cam or shaft surfaceA teflon over teflon running condition occurs, leading to low frictionSo it is normal to see gray teflon deposit on cam or shaftDo not remove that deposit, it is not dustWhen dust deposit has to be removed from the cam or the shaft, use dry cloth to avoid removing transferred teflon
Countershaft
Should countershaft no1 removal be required, refer to BRAKE then look for COUNTERSHAFT and BRAKE DISC REMOVAL
DISASSEMBLY