2006 Ski Doo REV Service Shop Manual, Page 272Get this manual
Section 06 ENGINE MANAGEMENT (SDI) Subsection 03 (COMPONENT INSPECTION, REPLACEMENT AND ADJUSTMENT)
Use new clamp to secure hose to fuel pump fittingCAUTION: Make sure that hose clamps are tight to avoid that they turn on their fittingsFuel Bleeding Procedure Manual Start Models When fuel tank is completely emptied, it may require up to 25-30 pull on rewind starter to fill the electric fuel pump reservoirFilling the fuel tank will solve this problemThe fuel inside the fuel tank will flow through the bypass hole of the electric fuel pump reservoir
Fuel Pressure Regulator Replacement
Remove fuel pump assembly as explained aboveRemove screws retaining regulator to pump assembly flangeReplace O-rings with new onesInstall them in pump assembly flange boreCAUTION: Regulator O-rings must be installed in pump assembly flange boreReverse removal procedure for installationInstall new gasket, then reinstall fuel pump assembly as explained above
A32C9MA
1Fuel injectors