2006 Ski Doo REV Service Shop Manual, Page 233Get this manual
Section 05 ENGINE MANAGEMENT (POWER TEK) Subsection 03 (COMPONENT INSPECTION, REPLACEMENT AND ADJUSTMENT) A33C4WC A33C51A
CARBURETOR 1Throttle position sensor (TPS) 2Screws
1Idle screw 2Throttle lever stopper AGap required here
Install the new TPSApply Loctite 243 on the TPS retaining screws, then torque to Nm (27 lbfin)Reinstall remaining removed partsProceed with the Closed Throttle ResetSee below
Activate throttle lever times to make sure throttle slides are fully closedConnect vehicle communication kit (VCK) and use B.U.D.SsoftwarePush the Reset button in the Setting tab of B.U.D.S