2006 Ski Doo REV Service Shop Manual, Page 169Get this manual
Section 03 ENGINES Subsection 09 (REWIND STARTER)
Callout
A32C6IA
A32C6CA
FREE PORTION INSERTED INTO SHEAVE
Lubricate housing post with silicone compound greaseInstall sheaveTo adjust rope tension: Wind rope on sheave and place rope sheave into starter housing making sure that the sheave hub notch engages in the rewind spring hookRotate the sheave counterclockwise until rope end is accessible through rope exit holeThis will give 12 turn of preloadPull the rope out of the starter housing and temporarily make knot to hold it