2006 Ski Doo REV Service Shop Manual, Page 157Get this manual

2006 Ski Doo REV Service Shop Manual, Page 157

Section 03 ENGINES Subsection 08 (COOLING SYSTEM)

Install the air inlet duct no3 with screws no1 and no2Reinstall tuned pipe and mufflerRefer to EXHAUST SYSTEM
A09C0VA

TYPICAL 1Unused shim(s) here 2Adjust here 3Positioning noses 4Some engines only

Select pulley halves so that the one with positioning noses will be on fan sideEnsure to insert these noses into fan notchesOnce fan belt is properly adjusted, torque fan nut to 48 Nm (35 lbfft) using holder wrench, as shown in the following photo

Back to 2006 Ski Doo REV Service Shop Manual