2005 Ski-Doo Tundra, Skandic, Expedition Shop Manual, Page 548Get this manual
Section 11 BODYFRAME Subsection 01 (BODY)
Skandic LTSWTWT LCSUV If headlamp bulb is burnt, tilt hoodRemove latches retaining plastic coverTemporary reinstall the top two latches to retain windshield during bulb replacement1 1
All Models CAUTION: Never touch glass portion of an halogen bulb with bare fingers, as it shortens its operating lifeIf by mistake glass is touched, clean it with isopropyl alcohol which will not leave film on the bulbTaillight If the taillight bulb is burnt, expose the bulb by removing red plastic lensTo remove, unscrew the retaining screwsVerify all lights after replacement
To remove decal; heat old decal with heat gun and peel off slowlyUsing isopropyl alcohol, clean the surface and dry thoroughlyApply liquid soap to new decal and carefully position the decalUsing sponge or squeegee, remove the air bubbles and surplus water working from the center toward the edgesAllow to air dryCAUTION: Do not apply isopropyl alcohol or solvent directly on decals