2005 Ski-Doo Tundra, Skandic, Expedition Shop Manual, Page 514Get this manual
Section 09 REAR SUSPENSION Subsection 04 (DRIVE AXLE)
The maximum de-synchronization for the sprockets is 1.5 mm (116 in)To check this tolerance, place axle assembly on plane surface and measure the gap between sprocket tooth and surface
A00F0CA
A00F0AA
1Grease seal type 2Oil seal type
TYPICAL TUNDRA 1Plane surface A1.5 mm (116 in) MAXIMUM
11, Bearing Protector
At assembly, flat side of bearing protector must be against bearing
5,12, Bearing