2005 Ski-Doo Tundra, Skandic, Expedition Shop Manual, Page 487Get this manual
Section 08 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
IGNITION SYSTEM TESTING 593 HO SDI ENGINE PART TEST TO BE PERFORMED Running insulation Engine stop switch Continuity in STOP position Insulation with DESS removed Continuity with DESS in run position Ground connection WIRE COLOR YLBK and BK MULTIMETER RESISTANCE PROBE MULTIMETER VALUE CONNECTION SCALE (ohms) B-21 ground B-21 ground B-38 B-26 B-38 B-26 00.0 or auto range or auto range 0.L 00.0 00.5 0.L 00.0 00.5 00.0 00.5 VOLTAGE MULTIMETER VALUE SCALE (volt) NOTE Engine cut-out switches must be in run positionEngine cut-out switches must be in stop positionDESS key removedDESS key must be in place Voltage always presentWhile cranking engineWhile cranking engineDisconnect the ignition coil from the ECM No test possible
YLBK and BK WHGR and WHBK WHGR and WHBK BK and negative battery terminal or body PK GNBL BUYL and WHYL ORBK and LBN
Same as battery voltage to volts 2.0
DESS switch
or auto range 00.0 or auto range