2005 Ski-Doo Tundra, Skandic, Expedition Shop Manual, Page 486Get this manual
Section 08 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
IGNITION SYSTEM TESTING 593 ENGINE PART TEST TO BE PERFORMED Running insulation Continuity in stop position Insulation in stop position Running continuity Output Ignition generator coil Coil insulation Ground continuity RESISTANCE WIRE COLOR BK and BKYL BK and BKYL BKGN and BKWH BKGN and BKWH RD and BKRD RD and BK BK and engine WHYL and BLYL WHBL and BK WHBL and BK Spark plug cap and Spark plug cap BK and BK VALUE (ohms) 0.L 00.000.5 0.L 00.000.5 11.621.6 0.L 00.000.5 MULTIMETER SCALE 00.0 00.0 00.0 00.0 00.0 00.0 00.0 VOLTAGE VALUE (volts) 15.030.0 MULTIMETER SCALE 00.0VAC NOTE All switches must be in run positionOnly one stop switch must be in stop positionTest one at timeTether cord cap must be offTether cord cap must be in place The term "engine" refers to the engine metal parts con nected to the magneto housing All switches must be in run position
Stop switches
Trigger coil MPEM
Resistance and output Output voltage Primary winding resistance Secondary winding resistance (spark plug cap included) Secondary winding resistance (without spark plug cap) Secondary winding voltage Insulation