2005 Ski-Doo Tundra, Skandic, Expedition Shop Manual, Page 468Get this manual
Section 08 ELECTRICAL Subsection 05 (ELECTRIC STARTER)
Brush Holder
Check the brush holder for insulation using growler test probesPlace one test probe on the insulated brush holder and the other test probe on the brush holder plateIf the growler lamp turns on, the brush holder has to be repaired or replaced
Brush Length
Measure brush lengthIf less than the specified value, replace themMODEL All LENGTH NEW 10 mm (.400 in) WEAR LIMIT mm (.236 in)
A32E22A
1Roller bearing 2Positive brush
Overrunning Clutch
The pinion of the overrunning clutch should turn smoothly in clockwise direction, and should not slip in counterclockwise directionIf defective, replaceCheck the pinion teeth for wear and damageIf defective, replace