2005 Ski-Doo Tundra, Skandic, Expedition Shop Manual, Page 409Get this manual

2005 Ski-Doo Tundra, Skandic, Expedition Shop Manual, Page 409

Section 07 TRANSMISSION Subsection 05 (BRAKE)
ADJUSTMENT
Models with Mechanical Brake Fully depress brake handle several times to obtain 13 mm (12 in) between brake handle and handlebar grip when brake is fully appliedBLEEDING
Change brake fluid once yearBleed brake system as follows: Keep sufficient brake fluid SRF (DOT 4) (PN 293 600 063) or brake fluid GTLMA (DOT 4) (PN 293 600 062) brake fluid in reservoir at all timesCAUTION: Use only SRF (DOT 4) (PN 293 600 063) or GTLMA (DOT 4) (PN 293 600 062) brake fluidInstall clear hose on left side bleederRoute this hose to containerOpen bleederPump brake lever until no air escapes from hoseClose bleederProceed the same way with the right side bleeder1

A08G02A

A13 mm (12 in)

Should this adjustment be unattainable, retighten nut no12 as neededModels with Hydraulic Brake There is no adjustment on these modelsChange brake fluid once yearIf brake handle feels spongy or if hydraulic system has been opened, the system must be bled, refer to BLEEDING PROCEDURE