2005 Ski-Doo Tundra, Skandic, Expedition Shop Manual, Page 396Get this manual
Section 07 TRANSMISSION Subsection 04 (PULLEY DISTANCE AND ALIGNMENT)
PULLEY DISTANCE AND ALIGNMENT
SERVICE TOOLS
Description Part Number Page
driven pulley opening tool529 034 200 381 driven pulley opening tool529 035 501 381
GENERAL
The pulley distance we will refer to in this section, is the space separating the drive and driven pulley outside diameters (Z measurement)This basic distance is provided as an assembly guide and indicates the dimensions between which satisfactory belt deflection will be obtainedBoth pulley distance adjustment and pulley alignment must be carried out to ensure the highest efficiency of the transmission systemFurthermore, optimum drive belt operation and minimal wear will be obtained only with proper pulley alignmentCAUTION: Before checking pulley adjustment, the rear suspension must be mounted on the vehicle and track tensionalignment must be doneAlways check pulley adjustment after suspension is adjusted
Skandic LTLT Use driven pulley opening tool (PN 529 035 501)All Models Remove drive beltInsert straight bar 9.5 mm (.375 in) square, 48 cm (19 in) long or the proper alignment bar into the opened driven pulley