2005 Ski-Doo Tundra, Skandic, Expedition Shop Manual, Page 225Get this manual
Section 04 ENGINE (4-TEC) Subsection 04 (LUBRICATION SYSTEM)
OIL NOZZLE
The oil nozzles no38 are located within the crankcaseEach piston is equipped with separate oil nozzle
R1004motr57A
R1004motr175A
1Oil nozzle
1Oil nozzle 2Crankcase 3Contact surface
NOTE: If the engine has to be disassembled within the scope of repair work, take this opportunity to clean the oil nozzles
Cleaning and Inspection
Clean oil nozzle with part cleaner then use an air gun to dry it
NOTE: If the oil nozzles are damaged or bent during installation work in the crankcase, they must be replaced immediatelyTorque oil nozzle screws to 19 Nm (168 lbfin)
OIL SIEVES