2005 Ski-Doo Tundra, Skandic, Expedition Shop Manual, Page 161Get this manual
Section 03 ENGINES (2-STROKE) Subsection 06 (OIL INJECTION SYSTEM)
Torque to Nm (44 lbfin)Cable plastic elbow must be fastened and fully insertedMake sure cable barrel is well seated in oil pump leverSecure barrel with plastic washer and circlipInstall cable lock washer on lever sideVerify cable and oil pump lever operation
2, Check Valve
593 and 593 HO SDI Engines Apply Loctite 648 (green) (PN 413 711 400) on the outer diameter of the check valve (machined section)Take care that Loctite is ONLY in this areaNOTE: Prior to coating it with Loctite, make sure check valve body is clean and dryClean from dirt or oil, if any, with pulley flange cleaner (PN 413 711 809)
A32C58A
POSITION FOR 593 ENGINE APTO side: 30 10 from cylinder axis to the bottom BMAG side: from cylinder axis to the top