2005 Ski-Doo Tundra, Skandic, Expedition Shop Manual, Page 107Get this manual

2005 Ski-Doo Tundra, Skandic, Expedition Shop Manual, Page 107

Section 03 ENGINES (2-STROKE) Subsection 02 (443 AND 552 ENGINES)
When installing plain oil seals (seal without locating ring or without spacing legs), ensure to maintain 1.0 mm (.040 in) gap1 A

CAUTION: Do not use Loctite 515 or 518 to seal crankcaseDo not use Loctite Primer with the Loctite 5910Using these products or non silicone-based sealant over previously sealed crankcase with Loctite 5910 will lead to poor adhesion and possibly leaking crankcaseThese products are chemically incompatiblesEven after cleaning, the Loctite 5910 would leave incompatible microscopic particlesUse plexiglass plate and apply some sealant on itUse soft rubber roller (5075 mm (2in)) (available in arts products suppliers for printmaking) and roll the sealant to get thin uniform coat on the plate (spread as necessary)When ready, apply the sealant on crankcase mating surfaces
A17C07A