2005 Ski-Doo Tundra, Skandic, Expedition Shop Manual, Page 99Get this manual
Section 03 ENGINES (2-STROKE) Subsection 02 (443 AND 552 ENGINES)
With blade stopper no13 removed, check reed valve for proper tightnessThere must be no play between blade and valve body when exerting finger pressure on blade at blade stopper locationIn case of play, turn blade upside down and recheckIf there is still play, replace blade andor valve bodyA17C02A
1Or use exhaust manifold to align cylinders
Position distance nuts no2 as shown below
A06C0FA
1No play
Check distance from blade stopper inner edge and distance from center of reed valve block
A03C1XA