2005 Ski-Doo Racing Handbook, Page 332Get this manual
SECTION 06DRIVE SYSTEM
Ensure that countershaft is properly aligned, then tighten retaining screwsNOTE: misaligned countershaft will result in difficulty to center the bearing in its supportTorque castellated nut of upper sprocket to 45 to 75 Nm (33 to 55 lbfft)Close chaincase referring to CHAINCASE
5, Brake Light Switch
There is no adjustment on these modelsCheck that switch is securely installed
BLEEDING
Change brake fluid oftenBleed brake system as follows: Keep sufficient SRF (DOT 4) (PN 293 600 063) or GTLMA (DOT 4) (PN 293 600 062) brake fluid in reservoir at all timesCAUTION: Use only SRF (DOT 4) (PN 293 600 063) or GTLMA (DOT 4) (PN 293 600 062) brake fluidInstall clear hose on bleederRoute this hose to containerOpen bleederPump brake lever until no air escapes from hoseClose bleeder1 2
5,12, Brake Cable and Nut