2005 Ski-Doo Racing Handbook, Page 193Get this manual
SECTION 05ENGINE PREPARATION
360 MODEL (ignition and electrical system testing) PART TEST TO BE PERFORMED
Primary winding resistance Secondary winding resistance spark plug wires and High voltage coil cap included Secondary winding resistance spark plug wires removed Secondary winding voltage StartRER switch (with battery) RDGY Charging voltage Battery voltage to switch from fuse and negative battery terminal StartRER switch (without battery) Continuity from startRER switch BE and BE to MPEM StartRER switch (all) Voltage supply from regulator RDBU and negative battery terminal Charging current Current to battery RD and RDWH YL and YL and GN YL and engine 6FA-A-F 6FA-B-F Engine 5000 RPM with fully charged 00.0 to 00.5 times 0.L 00.0 Vac 10 scale 24 batteryWith 30 fuse removed and ammeter in series00.0 or 3.5 to 5.5 times Do the test between and B, and and and using manual starterThe term engine refers to the metal parts connected to the magneto housing5RR-87F and negative battery terminal Above battery voltage below 15 volts 00.0 Vdc 12HG-8M 11DA-7F 00.0 or 1.0 RER signal at MPEM BEBK 11DA-7F 11DA-3F 00.0 Vdc 11 to 13 volts When RER button is activated and the engine is running12HG-5 and negative battery terminal 00.0 Vdc Battery voltage The fuse is located on the electrical config harnessStartRER signal at MPEM BE and BK 11DA-7F 11DA-3F 00.0 Vdc Battery voltage When startRER switch is activated in all conditions