2005 Ski-Doo Racing Handbook, Page 55Get this manual
SECTION 03CHASSIS PREPARATION
On all HPG take apart shocks from 1996 onThe floating piston is installed hollow side upA06F15B
1Fill to 10 mm (.393 in)
A27F0FC
Required distance for floating piston installationNOTE: If the floating piston is installed too far into the damper body, light air pressure through Schrader valve (with core removed) will move piston outwardNOTE: Reinstall Schrader valve core after IFP has been installed at correct height and before adding oil
NOTE: Although we do not measure the exact amount of oil added to the damper, approximately 106 mL (3.58 oz U.S will be usedCarefully insert damper rod into the damper bodyInstall damper rod assembly into the damper bodyLightly oil damper piston seal ring with shock oil to ease installation