2005 Ski-Doo RT Series Shop Manual, Page 236Get this manual
Section 06 DRIVE SYSTEM Subsection 06 (CHAINCASE)
GENERAL
During assemblyinstallation, use the torque values and service products as in the exploded viewClean threads before applying threadlockerRefer to SELF-LOCKING FASTENERS and LOCTITE APPLICATION at the beginning of this manual for complete procedure
OIL CHANGE
Draining Procedure
Place drain pan under chaincase drain plug areaRemove dipstick no1Using an Allen key, remove the drain plug no3
WARNING
Torque wrench tightening specifications must strictly be adhered toLocking devices (e.g locking tabs, elastic stop nuts, self-locking fasteners, cotter pin, etc must be installed or replaced with new ones where specifiedIf the efficiency of locking device is impaired, it must be renewed
CHAINCASE OIL LEVEL
With the vehicle on level surface, check the oil level by removing dipstick no1Oil level must be between lower and upper marksA33D1NA