2005 Ski-Doo RT Series Shop Manual, Page 217Get this manual
Section 06 DRIVE SYSTEM Subsection 03 (DRIVEN PULLEY)
ROLLER DIAMETER Inner diameter Outer diameter
SERVICE LIMIT 12.5 mm (.492 in) 23.5 mm (.925 in)
Measure the roller thickness
A35D16A
During cam installation, make sure to align the cam slides with the rollersINSTALLATION
The installation is the reverse of the removal procedureHowever, pay attention to the following detailsApply Loctite antiseize lubricant (PN 293 800 070) on countershaft splinesApply Loctite 243 (blue) (PN 293 800 060) on driven pulley boltPerform pulley alignment before starting engine and verify drive belt heightRefer to PULLEY ALIGNMENT and DRIVE BELT
A35D14A
AThickness of roller