2005 Ski-Doo RT Series Shop Manual, Page 208Get this manual
Section 06 DRIVE SYSTEM Subsection 02 (DRIVE PULLEY)
Torque ring gear screwsCAUTION: Do not use other screws than recommended ones in the parts catalogNever use bolts coming from another type of pulleyRING GEAR ON TRA ENGINE All 995 SDI TORQUE 53 Nm (39 lbfft)
Apply Loctite 609 (PN 413 703 100) between pin and lever when assembling
Dowel Tube and Ramp
Insert dowel tube no26 from chamfered sideMake sure ramp no27 is centered on dowel tubeCalibration Screw, Washer and Locking Nut
When installing calibration screw no22, make sure to install washer no23 as shown1
A16D08A
1Chamfered side
Position dowel tube split at the angle AA