2005 Ski-Doo RT Series Shop Manual, Page 190Get this manual
Section 05 ELECTRICAL SYSTEM Subsection 05 (ACCESSORIES AND LIGHTING SYSTEM)
529 035 869
529 035 868
Connect the supply harness (PN 529 035 869) to diagnostic connector, located on right side of the vehicleNow the headlight and accessories systems are supplied with 12 voltsRefer to WIRING DIAGRAM section to troubleshoot lighting systemCAUTION: Always use the proper supply harness and cablesEnsure to respect polarity when connecting cable clips to batteryMatch RED cables togetherOnce lighting system testing is done, disconnect supply cable from vehicle and then 12-Volt supply from the supply cable
The obtained value should be between 12 and 14.5 Vdc No voltage: Check accessories fuse (20 A), connectors and wiring harness Voltage is good: After checking the accessories, change the power outlet
Installation
The installation is the reverse of the removal procedure