2005 Ski-Doo RT Series Shop Manual, Page 116Get this manual
Section 02 ENGINE Subsection 12 (OIL INJECTION SYSTEM)
Injection Oil Level sensor
For installation, reverse the removal procedure
Injection Oil Filter
For installation, reverse the removal procedureNOTE: The filter must be installed with the arrow pointing toward the pump
Injection Oil Pump
For installation, reverse the removal procedureHowever, pay attention to the followingApply Molykote 111 (PN 413 707 000) on O-ring no14 before installationTorque the oil pump screws no13 to Nm (44 lbfin)Make sure cable barrel is well seated in oil pump leverSecure barrel with plastic washer and circlipInstall cable lock washer on left side of supportVerify cable and oil pump lever operation then adjust cable
A32C57A
APPLY LOCTITE ON THIS AREA ONLY