2005 Ski-Doo RT Series Shop Manual, Page 103Get this manual
Section 02 ENGINE Subsection 10 (COOLING SYSTEM) A35C3DA
1Disconnect engine outlet hose
A35C3FA
Respect the following tightening torque specification:
DESCRIPTION Engine drain plug TIGHTENING TORQUE 24 Nm (18 lbfft)
TEMPERATURE SENSOR 1Apply Loctite 5910
Pressure Cap
Check if coolant tank cap pressurizes the system for minutesIf not, install new 90 kPa (13 PSI) cap (do not exceed this pressure)
DISASSEMBLY AND ASSEMBLY
Coolant Pump
Refer to BOTTOM END section