2005 Ski-Doo RT Series Shop Manual, Page 32Get this manual
Section 01 MAINTENANCE Subsection 03 (PRESEASON PREPARATION)
DRIVE SYSTEM
Drive Belt
Inspect belt for cracks, fraying or abnormal wearReplace if necessaryMake sure to install the proper belt with arrow printed on belt pointing front of vehicle
Track Tension and Alignment
Verify track tension and alignment, refer to DRIVE SYSTEM section and the appropriate subsectionNOTE: Track tension and alignment are interrelatedDo not adjust one without checking the otherTrack tension procedure must be carried out prior to track alignment
Drive and Driven Pulley
Clean drive and driven pulleys sheaves with pulley flange cleaner (PN 413 711 809)
ELECTRICAL SYSTEM
Battery (if so equipped)
Verify that battery is fully charged, if not, refer to the appropriate charging procedure in ELECTRICAL SYSTEM section
Tightening Torque of Drive Pulley Screw
Retorque if necessary drive pulley screw to 88 Nm (65 lbfft)
Tightening Torque of Ring Gear Screws