2005 Ski-Doo REV Series Shop Manual, Page 368Get this manual
Section 08 DRIVE SYSTEM Subsection 05 (BRAKE)
A33D0WB
529 035 699
A33D0YA
1Screws replacing bearing support screws
Tighten the countershaft bearing removerinstaller bolt to pull the bearing out of it housing
1Washers use as mm (18 in) spacer 2Original retaining screw and shouldered washer 3Bearing against circlip
Ensure that countershaft is properly aligned, then tighten retaining screwsNOTE: misaligned countershaft will result in difficulty to center the bearing in its supportTorque castellated nut of upper sprocket to 60 Nm (44 lbfft)Close chaincase referring to CHAINCASE
COUNTERSHAFT
Removal
A33D0XA